Brief Introduction

By utilizing CNC machining centers, the cutting efficiency of Oriental Crystalline Silicon panels is significantly enhanced. For manufacturing enterprises, this can notably reduce the labor required and lower the processing cost per unit area.

Operating Principle

The operating principle involves automatically recording the position of the Oriental Crystalline Silicon (OCS) panels using a photoelectric scanning system. Subsequently, the cutting head with diamond wheels mounted on the tool box moves along the X and Y axes under program control to cut the substrate. The control part of the machine employs a CNC motion controller, while the driving part utilizes advanced linear motor drives.

Equipment Composition

Equipment main frame, arm extension mechanism, glass conveying mechanism, mechanical flipping mechanism, electrical control system, program control system.

Technical Reference

★Dimensions: 45003000850±50mm
★Maximum Cutting Size: 3660*2440mm
★Minimum Cutting Size: 1000*1000mm
★Thickness: 4-18mm
★Cycle Time for Upper Piece: 40-100 seconds (adjustable)
★Transmission Speed: 0-40m/min (adjustable)
★Maximum Suction Depth: 700mm
★Maximum Load Capacity of Upper Plate: 500KG
★Number of Upper Plate Sections: 4
★Number of Single-Arm Suction Cups: 4
★Upper Sheet Flip Arm: Double Flip
★Upper Sheet Workstation: Dual Workstation
★Power Supply/Power: Three-phase 380V 50-60Hz
★Total Installed Power: 8KW
★Compressed Air: 0-0.6Mpa
★Vacuum Pressure: 0 to -101Kpa (adjustable according to the thickness of the board)